Commercial Marble Floor Polishing and Cleaning Project

Marble Floor Polishing Tampa FL

Marble Floor Polishing

The marble floor polishing process may be as simple as cleaning the stone using a neutral or higher ph cleaner to remove dirt from the floor and using a special compound and a special pad under a weighted machine to create a hard shine that can last for years but more than likely some honing will be necessary.

For Professional Marble Floor Polishing – Call AFC Floor Care today. Tampa, St. Pete, & Clearwater.

Tampa FL Tile Floor Cleaning

New Residential Tile Floor Cleaning Projects in Tampa

Tile Floor Cleaning Tampa FL

 

Tile Floor Cleaning

For Professional Tile Floor Cleaning – Call AFC Floor Care today. Tampa, St. Pete, & Clearwater.

New Commercial Floor Cleaning Projects by AFC Floor Care

Strip and Wax Floors Tampa FL

Strip and Wax VCT Tampa FL

Commercial Floor Cleaning St. Pete FL

Commercial Floor Cleaning

For Professional Commercial Floor Cleaning – Call AFC Floor Care today. Tampa, St. Pete, & Clearwater.

Ceramic Tile Cleaning Tampa FL

Ceramic Tile Cleaning with AFC

Ceramic Tile Cleaning Tampa FL

Ceramic Tile Cleaning

Ceramic Tile Cleaning is one of the most critical components to your ceramic tile lasting for several years. Ceramic tile is one of the most durable flooring surfaces on the market today and with just a little care it can last for many years. Ceramic tile is easy to take care of but what presents a problem for home owner is maintaining the grout. After years of mopping, dirt accumulates in the grout and is very difficult to remove.

When AFC Floor Care cleans ceramic tile we start by sweeping the floor to remove dry dirt and trash particles. We than apply a high ph solution over the floor and grout and allow dwell time to loosen trapped dirt. We work in small sections allowing us to control the solution. Using a special brush and a weighted floor machine the floor is scrubbed to loosen the soil and grease that has accumulated on the tile and in the grout. The floor is than squeegeed and wet vacuumed to remove the dirty slurry that has been created. The next step is probably one of the most important steps in the whole process. Using a special tool called a Turbo we rinse the floor and grout.

The turbo is a tool designed to apply hot water (under high pressure) through two spinner jets in a circular motion which is contained under a plastic shroud that has vacuum ports along the perimeter of the shroud. The hot water and vacuum is provided by a truck mount machine and the dirty water is deposited into a recovery tank mounted in a van. We then mop any excess water and neutralize the floor with a product designed specifically for that purpose.

The floor is allowed to dry most of the way and then an impregnator can be applied to the grout. It is not necessary to seal or impregnate the tile put there are advantages  to doing it.  Impregnators are also know as sealers. They do not cause the grout to darken and do not add shine. The reason for using impregnators is it adds a temporary barrier between the grout and possible staining agents such as red wine and oils. They typically will last about 3 to 5 years.  We have found that they are most effective in areas such as Kitchens, dining areas and bathrooms.

There is a lot that goes into properly cleaning ceramic tile floors but if in a residential environment it is cleaned every one to two years and proper maintenance is performed in between times the floor will look like new for years to come!

For Professional Ceramic Tile Cleaning – Call AFC Floor Care today. Tampa, St. Pete, & Clearwater.